R21xx-HP FlexFabric 11900 Fundamentals Command Reference

128
command-alias enable
command-alias mapping display show
#
ftp server enable
#
telnet server enable
#
switch-mode normal slot 2
switch-mode mix-bridging-routing slot 3
---- More ----
Related commands
• reset saved-configuration
• save
display startup
Use display startup to display the current startup configuration file and the next-startup configuration
files.
Syntax
display startup
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Current startup configuration file is the configuration file that has been loaded. Next-startup
configuration file is the configuration file used at the next startup.
In standalone mode:
The standby MPU always uses the same current startup configuration file as the active MPU. After an
active/standby switchover, it is normal that the current startup configuration files on them are displayed
as NULL, because the new active MPU continues to run with the running configuration rather than
rebooting with the previous current startup configuration file.
In IRF mode:
The MPUs in the IRF fabric always uses the same current startup configuration file as the global active
MPU. After an active/standby switchover, it is normal that the current startup configuration files on them
are displayed as NULL, because the new global active MPU continues to run with the running
configuration rather than rebooting with the previous current startup configuration file.
Examples
In standalone mode:
# Display startup configuration files.
<Sysname> display startup
MainBoard: