R21xx-HP FlexFabric 11900 Fundamentals Command Reference

130
display this
Use display this to display the running configuration in the current view.
Syntax
display this
Views
Any view
Predefined user roles
network-admin
network-operator
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
Typically, this command does not display parameters that are set to their default settings.
For some parameters that can be successfully configured even if their dependent features are not enabled,
this command displays their settings after the dependent features are enabled.
This command can be executed in any user interface view to display the running configuration of all user
view interfaces.
Examples
# Display the running configuration on interface Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface Ten-GigabitEthernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] display this
#
interface Ten-GigabitEthernet1/0/1
port link-mode route
#
return
# Display the running configuration on user interfaces.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] display this
#
user-interface aux 0
user-role network-operator
#
user-interface vty 0 15
authentication-mode none
user-role network-admin
#
return