R21xx-HP FlexFabric 11900 Fundamentals Command Reference

139
flash:/ssh.bin already exists on chassis 1 slot 4.
Overwrite it? [Y/N]:y
The specified file list will be used as the backup startup software images at the next
reboot on chassis 1 slot 4.
Related commands
display boot-loader
boot-loader update
In standalone mode:
Use boot-loader update to synchronize startup images from the active MPU to the standby MPU.
In IRF mode:
Use boot-loader update to synchronize startup images from the global active MPU to a standby MPU.
Syntax
In standalone mode:
boot-loader update slot slot-number
In IRF mode:
boot-loader update chassis chassis-number slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the slot number of the standby MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a standby MPU of the global active MPU. The
chassis-number argument represents the IRF member ID of the device that holds the standby MPU. The
slot-number argument represents the slot number of the standby MPU. (In IRF mode.)
Usage guidelines
You can use this command to synchronize startup images after adding new MPUs.
The startup images synchronized to the standby MPU are set as main startup images, regardless of
whether the source startup images are main or backup.
In the following description, the term "active MPU" collectively refers to the active MPU in standalone
mode and the global active MPU in IRF mode.
If the active MPU has started up with main startup images, its main startup images are synchronized to
the standby MPU, regardless of whether any change has been made to this set of startup images.
If the active MPU has started up with backup startup images, its backup startup images are synchronized
to the standby MPU, regardless of whether any change has been made to this set of startup images.
Startup image synchronization fails if any software image being synchronized is not available or has
been corrupted.