R21xx-HP FlexFabric 11900 Fundamentals Command Reference

140
If an ISSU patch installation or software upgrade has been performed, use the install commit command
to update the main startup images on the active MPU before software synchronization for startup image
consistency between the active MPU and the standby MPU.
Examples
# In standalone mode, synchronize startup images from the active MPU to the standby MPU in slot 5.
<Sysname> boot-loader update slot 5
This command will update the specified standby MPU. Continue? [Y/N]:y
Updating. Please wait...
Copying main startup software images to slot 5. Please wait...
Done.
Setting copied images as main startup software images for slot 5...
Done.
Successfully updated the startup software images of slot 5.
# In IRF mode, synchronize startup images from the global active MPU to the MPU in slot 5 on IRF
member device 1.
<Sysname> boot-loader update chassis 1 slot 5
This command will update the specified standby MPU. Continue? [Y/N]:y
Updating. Please wait...
Copying main startup software images to chassis 1 slot 5. Please wait...
Done.
Setting copied images as main startup software images for chassis 1 slot 5...
Done.
Successfully updated the startup software images of chassis 1 slot 5.
Related commands
• display boot-loader
• install commit
bootrom update
Use bootrom update to load the BootWare image in the flash to the Normal area of BootWare.
Syntax
In standalone mode:
bootrom update file file-url slot slot-number-list
In IRF mode:
bootrom update file file-url chassis chassis-number slot slot-number-list
Views
User view
Predefined user roles
network-admin
Parameters
file file-url: Specifies the file that contains the BootWare image in the flash. The file-url argument
represents the file name, a string of 1 to 63 characters.