R21xx-HP FlexFabric 11900 Fundamentals Command Reference

173
display install committed
Use display install committed to display main startup software images.
Syntax
In standalone mode:
display install committed [ slot slot-number ] [ verbose ]
In IRF mode:
display install committed [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command is
applied to all cards in the device. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member. If you do not specify this
option, the command is applied to all cards in the IRF fabric. (In IRF mode.)
verbose: Displays detailed information. If you do not specify this keyword, the command displays only
the names of the software images.
Usage guidelines
When you execute the install commit command, the system refreshes the main startup software image set
to use the currently active software images as the main startup software images.
The boot-loader file command can also change the main startup software image set.
For more information about main and backup startup software images and image sets, see Fundamental
Configuration Guide.
Examples
# Display the main startup software images.
<Sysname> display install committed
Committed packages on slot 5:
flash:/boot-a0201.bin
flash:/system-a0201.bin
flash:/feature.bin
# Display detailed information about main startup software images.
<Sysname> display install committed verbose
Committed packages on slot 5:
flash:/boot-a0201.bin
[Package]
Vendor: HP
Product: xxxx
Service name: boot