R21xx-HP FlexFabric 11900 Fundamentals Command Reference

178
Install activate flash:/ssh.bin on slot 5
Job 1 completed successfully at 04/28/2001 08:39:30.
Detail of activating packages on slot 5.
Get upgrade policy successfully.
Detail of activating packages on slot 5.
Uncompress package to system successfully.
Remove files from system successfully.
Related commands
reset install log-history oldest
display install package
Use display install package to display software image file information.
Syntax
display install package { filename | all } [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
filename: Specifies the name of a software image file, a case-insensitive string of 1 to 63 characters. This
file must be saved in the root directory of an MPU's Flash and use the extension .bin. If the file is saved
on the active MPU, enter its name in the format flash:/xxx.bin. If the file is saved on the standby MPU,
enter its name in the format slotn#flash:/filename, where n represents the number of the slot holding the
standby MPU. (In standalone mode.)
filename: Specifies the name of a software image file, a case-insensitive string of 1 to 63 characters. This
file must be saved in the root directory of a member device's Flash and use the extension .bin. If the file
is saved on the active MPU of the master, enter its name in the format flash:/xxx.bin. If the file is saved
on a subordinate device, enter its name in the format chassism#slotn#flash:/xxx.bin, where m represents
the member ID of the subordinate device and m represents the number of the slot holding the MPU. (In
IRF mode.)
all: Specifies all software image files in the root directories of the active MPU's storage media. (In
standalone mode.)
all: Specifies all software image files in the root directories of the storage media on the master's active
MPU. (In IRF mode.)
verbose: Displays detailed information. If you do not specify this keyword, the command displays only
basic software image information.
Examples
# Display information about software image file system.bin.
<Sysname> display install package flash:/system.bin