R21xx-HP FlexFabric 11900 Fundamentals Command Reference

190
flash:/system-a0201.bin
<Sysname> display install committed
Committed packages on slot 5:
flash:/boot-a0201.bin
flash:/system-a0201.bin
The output shows the device is rolled back to the original software configuration and image
flash:/ssh-feature-a0201.bin has been removed.
Related commands
display install rollback
install verify
Use install verify to verify the software change confirmation status and software image integrity and
consistency.
Syntax
install verify
Views
User view
Predefined user roles
network-admin
Usage guidelines
If some software images are not integral or some activated/deactivated software images are not
confirmed, a switchover might not occur correctly, and the MPUs might run different versions of software
images after a reboot or even cannot reboot correctly. (In standalone mode.)
If some software images are not integral or some activated/deactivated software images are not
confirmed, a switchover might not occur correctly, and the MPUs might run different versions of software
images after a reboot or even cannot reboot correctly. (In IRF mode.)
To solve the problem, download and install the software images again to ensure software integrity, or
use the install activate, install deactivate, and install commit commands as appropriate to guarantee
software image consistency.
Examples
# In standalone mode, verify the software change confirmation status and software image integrity and
consistency.
<Sysname> install verify
Active packages on slot 5 are the reference packages.
Packages will be compared with the reference packages.
This operation will take several minutes, please wait...
Verifying packages on slot 4:
Start to check active package completeness.
flash:/boot-a0101.bin verification successful.
flash:/system-a0101.bin verification successful.
Start to check active package consistency.
Active packages are consistent with committed packages on their own board.
Active packages are consistent with the reference packages.