R21xx-HP FlexFabric 11900 Fundamentals Command Reference

198
Press ENTER to get started.
# Disable displaying the copyright statement.
<Sysname> system-view
[Sysname] undo copyright-info enable
• When a Telnet user logs in, the user view prompt appears:
<Sysname>
• When a console user quits user view, the following message appears:
User interface aux0 is available.
Press ENTER to get started.
display alarm
Use display alarm to display alarm information.
Syntax
In standalone mode:
display alarm [ slot slot-number ]
In IRF mode:
display alarm [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by the number of the slot where the card resides. If no card is specified,
the command displays the alarm information of all cards. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument refers to the ID of the IRF member device, and the slot-number argument refers to the number
of the slot where the card resides. If no IRF member device or card is specified, the command displays
the alarm information of all cards in the IRF fabric. (In IRF mode.)
Examples
# Display alarm information. (In standalone mode.)
<Sysname> display alarm
Slot Level Info
- INFO Chassis 1 power 1 is absent.
- INFO Chassis 1 power 2 is absent.
- INFO Chassis 1 power 3 is absent.