R21xx-HP FlexFabric 11900 Fundamentals Command Reference

208
8 NONE Absent 0 NONE None
9 NONE Absent 0 NONE None
The output shows that the device has two MPUs and one interface card. The standby MPU is in slot 4, the
active MPU is in slot 5, and the interface card is in slot 2.
Table 29 Command output
Field Descri
p
tion
Slot . Number of the slot where the card resides.
Type Hardware type of the card.
Status
Card status:
• Standby—The card is a standby MPU.
• Master—The card is the active MPU.
• Absent—The slot is not installed with a card.
• Fault—The card is faulty and cannot start up.
• Normal—The card is an interface card and is operating correctly.
Subslot Maximum number of subcards that the card supports.
Soft Ver Software version of the card.
Patch Ver Patch version of the card.
# In IRF mode, display device information about all IRF member devices.
<Sysname> display device
Chassis Slot. Type State Subslot Soft Ver Patch Ver
1 0 NONE Normal 0 NONE None
1 1 NONE Normal 0 NONE None
1 2 LSU1TGS32SF9 Normal 0 11900-2105 None
1 3 NONE Absent 0 NONE None
1 4 LSU1SUPB9 Standby 0 11900-2105 None
1 5 LSU1SUPB9 Master 0 11900-2105 None
1 6 LSU1FAB08D9 Normal 0 11900-2105 None
1 7 NONE Absent 0 NONE None
1 8 NONE Absent 0 NONE None
1 9 NONE Absent 0 NONE None
2 0 NONE Normal 0 NONE None
2 1 NONE Normal 0 NONE None
2 2 LSU1TGS32SF9 Normal 0 11900-2105 None
2 3 NONE Absent 0 NONE None
2 4 LSU1SUPB9 Standby 0 11900-2105 None
2 5 LSU1SUPB9 Standby 0 11900-2105 None
2 6 LSU1FAB08D9 Normal 0 11900-2105 None
2 7 NONE Absent 0 NONE None
2 8 NONE Absent 0 NONE None
2 9 NONE Absent 0 NONE None
The output shows that the IRF fabric has two member devices 1 and 2. The card in slot 5 on member
device 1 is the active MPU of the IRF fabric. The cards in slot 4 and slot 5 on member device 2 are
standby MPUs of the IRF fabric.