R21xx-HP FlexFabric 11900 Fundamentals Command Reference

209
Table 30 Command output
Field Descri
p
tion
Chassis ID of the IRF member device.
Slot Number of the slot where the card on the IRF member device resides.
Type Card type.
State
Card state:
• Absent—The card is inserted in the slot.
• Master—The card is the active MPU of the IRF fabric.
• Standby—The card is a standby MPU of the IRF fabric.
• Normal—The card is an interface card and is operating correctly.
• Fault—The card is faulty.
Subslot Maximum number of subcards that the card supports.
Soft Ver Software version of the card.
Patch Ver Patch version of the card. If no patch is installed, the value of this field is None.
display device manuinfo
Use display device manuinfo to display the electronic label data for the device.
Syntax
In standalone mode:
display device manuinfo [ slot slot-number ]
In IRF mode:
display device manuinfo [ chassis chassis-number [ slot slot-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
chassis chassis-number: Specifies an IRF member device by its chassis number. (In IRF mode.)
slot slot-number: Specifies a card by the number of the slot where the card resides. If no card is specified,
this command displays the electronic label data for all cards. (In IRF mode.)
Usage guidelines
An electronic label is a profile of a device or card and contains the permanent configuration including
the serial number, manufacturing date, MAC address, and vendor name. The data is written to the
storage component during debugging or testing.
Examples
# In standalone mode, display the electronic label data for the device.