R21xx-HP FlexFabric 11900 Fundamentals Command Reference

225
NORMAL Normal mode.
NONE The card is a switching fabric module.
display scheduler schedule
Use display scheduler schedule to display schedule information.
Syntax
display scheduler schedule [ schedule-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
schedule-name: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. If no
schedule is specified, the command displays information about all schedules.
Examples
# Display information about all schedules.
<Sysname> display scheduler schedule
Schedule name : shutdown
Schedule type : Run once after 0 hours 2 minutes
Start time : Tue Dec 27 10:44:42 2011
Last execution time : Tue Dec 27 10:44:42 2011
Last completion time : Tue Dec 27 10:44:47 2011
Execution counts : 1
-----------------------------------------------------------------------
Job name Last execution status
shutdown Successful
Table 36 Command output
Field Descri
p
tion
Schedule type Execution time setting of the schedule. If no execution time is specified, this field is blank.
Start time
Time to execute the schedule for the first time. If no execution time is specified, this field
is blank.
Last execution time
Last time when the schedule was executed. If no execution time is specified, this field is
blank. If the schedule has never been executed, "Yet to be executed" is displayed for this
field.
Last completion
time
Last time when the schedule was completed. If no execution time is specified, this field is
blank.
Execution counts
Number of times the schedule has been executed. If the schedule has never been
executed, this field is blank.
Job name Name of a job under the schedule.