R21xx-HP FlexFabric 11900 Fundamentals Command Reference

229
GigabitEthernet1/0/1 transceiver diagnostic information:
Current diagnostic parameters:
Temp(°C) Voltage(V) Bias(mA) RX power(dBm) TX power(dBm)
36 3.31 6.13 -35.64 -5.19
Table 39 Command output
Field Descri
p
tion
transceiver diagnostic information Digital diagnosis information of the transceiver module on the interface.
Temp.(°C) Temperature in °C, accurate to 1°C.
Voltage(V) Voltage in V, accurate to 0.01 V.
Bias(mA) Bias current in mA, accurate to 0.01 mA.
RX power(dBm) RX power in dBm, accurate to 0.01 dBm.
TX power(dBm) TX power in dBm, accurate to 0.01 dBm.
display transceiver interface
Use display transceiver interface to display the key parameters of transceiver modules.
Syntax
display transceiver interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
this command displays the key parameters of the transceiver modules on all interfaces of the device.
Examples
# Display the key parameters of the transceiver module on interface GigabitEthernet 1/0/1.
<Sysname> display transceiver interface gigabitethernet 1/0/1
GigabitEthernet1/0/1 transceiver information:
Transceiver Type : 1000_BASE_SX_SFP
Connector Type : LC
Wavelength(nm) : 850
Transfer Distance(m) : 550(50um),270(62.5um)
Digital Diagnostic Monitoring : YES
Vendor Name : HP
Ordering Name : SFP-GE-SX-MM850
Table 40 Command output
Field Descri
p
tion
transceiver information Transceiver module information.