R21xx-HP FlexFabric 11900 Fundamentals Command Reference

240
# If any configuration has changed, reboot the device and save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait...
Configuration is saved to flash successfully.
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If any configuration has changed, reboot the device but do not save the configuration.
<Sysname> reboot
Start to check configuration with next startup configuration file, please
wait.........DONE!
Current configuration will be lost after the reboot, save current configuration? [Y/N]:n
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# Reboot the device immediately without performing any software check.
<Sysname> reboot force
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# In standalone mode, reboot the interface card in slot 2.
<Sysname> reboot slot 2
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In standalone mode, reboot the interface card in slot 2 by force.
<Sysname> reboot slot 2 force
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot IRF member device 2.
<Sysname> reboot chassis 2
This command will reboot the specified chassis, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot IRF member device 2 by force.
<Sysname> reboot chassis 2 force
This command will reboot the specified chassis, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot the interface card in slot 2 on IRF member device 2.
<Sysname> reboot chassis 2 slot 2
This command will reboot the specified slot, Continue? [Y/N]:y
Now rebooting, please wait...
# In IRF mode, reboot the interface card in slot 2 on IRF member device 2 by force.
<Sysname> reboot chassis 2 slot 2 force
This command will reboot the specified slot, Continue? [Y/N]:y