R21xx-HP FlexFabric 11900 Fundamentals Command Reference

18
Examples
# Configure AUX 0 to use 5 data bits for each character.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 5
display telnet client
Use display telnet client to display the source IPv4 address or source interface configured for the device
to use for outgoing Telnet packets when serving as a Telnet client.
Syntax
display telnet client
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display the Telnet client configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client
The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it
serves as a Telnet client.
Related commands
telnet client source
display user-interface
Use display user-interface to display user interface information.
Syntax
display user-interface [ number1 | { aux | vty } number2 ] [ summary ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
number1: Specifies the absolute number of a user interface, in the range of 0 to 23.
aux: Specifies the AUX user interface.
vty: Specifies the VTY user interface.