R21xx-HP FlexFabric 11900 Fundamentals Command Reference

254
The time at command, the time once command, and the time repeating command overwrite one another,
whichever is configured most recently takes effect.
Examples
# Configure the device to execute schedule saveconfig once at 15:00.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once at 15:00
Schedule starts at 15:00 5/11/2011.
# Configure the device to execute schedule saveconfig once at 15:00 on the coming 15th day in a
month.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once at 15:00 month-date 15
# Configure the device to execute schedule saveconfig at 12:00 p.m. on the coming Monday and Friday.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once at 12:00 week-day mon fri
# Configure the device to execute schedule saveconfig after 10 minutes.
<Sysname> system-view
[Sysname] scheduler schedule saveconfig
[Sysname-schedule-saveconfig] time once delay 10
Related commands
scheduler schedule
time repeating
Use time repeating to specify an execution time table for a periodic schedule.
Use undo time to remove the execution time configuration for a schedule.
Syntax
time repeating [ at time [ date ] ] interval interval-time
time repeating at time [ month-date [ month-day | last ] | week-day week-day&<1-7> ]
undo time
Default
No execution time table is specified for a schedule.
Views
Schedule view
Predefined user roles
network-admin
Parameters
at time: Specifies the execution time in the format hh:mm, where hh is in the range of 0 to 23, and mm
is in the range of 0 to 59. If you do not specify this option, the current system time is used as the execution
time.