R21xx-HP FlexFabric 11900 Fundamentals Command Reference

255

date: Specifies the start date for the periodic schedule, in the format MM/DD/YYYY or YYYY/MM/DD.

The YYYY value is in the range of 2000 to 2035, the MM value is in the range of 1 to 12, and the value

range of DD depends on the month value. If you do not specify this argument, the execution start date is

the first day when the specified time arrives.

interval interval-time: Specifies the execution time interval in the format hh:mm or mm. This argument can

consist up to 6 characters. When in the format hh:mm, mm must be in the range of 0 to 59. When in the

format mm, this argument must be at least 1 minute.

month-date [ month-day | last ]: Specifies a day in a month, in the range 1 to 31. The last keyword

indicates the last day of a month.

week-day week-day&<1-7>: Specifies one or more week days. Valid values include Mon, Tue, Wed, Thu,

Fri, Sat, and Sun. <1-7> means that you can specify 1 to 7 week days. To specify multiple week days,

separate the values with spaces.

Usage guidelines

The time repeating [ at time [ date ] ] interval interval-time command configures the device to execute a

schedule at an interval from the specified time on.

The time repeating at time [ month-date [ month-day | last ] | week-day week-day&<1-7> ] command

configures the device to execute a schedule at the specified time on every specified day in a month or

week.

The time at command, the time once command, and the time repeating command overwrite one another,

whichever is configured most recently takes effect.

Examples

# Configure the device to execute schedule saveconfig once a hour from 8:00 a.m. on.

<Sysname> system-view