R21xx-HP FlexFabric 11900 Fundamentals Command Reference

22
Reply from 192.168.1.49: bytes=56 Sequence=2 ttl=255 time=3 ms
2. Press a.
The task is terminated, and the system returns to user view.
--- 192.168.1.49 ping statistics ---
2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
<Sysname>
flow-control
Use flow-control to configure the flow control mode.
Use undo flow-control to restore the default.
Syntax
flow-control { hardware | none | software }
undo flow-control
Default
The flow control mode is none.
Views
AUX user interface view
Predefined user roles
network-admin
Parameters
hardware: Performs hardware flow control.
none: Disables flow control.
software: Performs software flow control.
Usage guidelines
The switch supports only the none flow control mode.
Examples
# Configure software flow control in the inbound and outbound directions for user interface AUX 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] flow-control none
free user-interface
Use free user-interface to release a user interface.
Syntax
free user-interface { number1 | { aux | vty } number2 }