R21xx-HP FlexFabric 11900 Fundamentals Command Reference

30
Related commands
authentication-mode
shell
Use shell to enable the terminal service for a user interface.
Use undo shell to disable the terminal service for a user interface.
Syntax
shell
undo shell
Default
The terminal service is enabled on all user interfaces.
Views
VTY user interface view
Predefined user roles
network-admin
Usage guidelines
You cannot disable the terminal service on the user interface you are using.
To configure the device to act as a Telnet or SSH server on a user interface, you cannot configure the
undo shell command for the user interface.
Examples
# Disable the terminal service for user interface VTY 0 through VTY 4 so no user can log in to the device
through the user interfaces.
<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
Disable ui-vty0-4 , are you sure? [Y/N]:y
[Sysname-ui-vty0-4]
speed
Use speed to set the transmission rate (also called the "baud rate") on a user interface.
Use undo speed to restore the default.
Syntax
speed speed-value
undo speed
Default
The transmission rate is 9600 bps.
Views
AUX user interface view