R21xx-HP FlexFabric 11900 Fundamentals Command Reference

61
[Sysname-role-role1] rule 5 deny read feature aaa
# Permit role1 to access all read, write, and execute commands of the feature group security-features.
[Sysname-role-role1] rule 6 permit read write execute feature-group security-features
Related commands
• display role
• display role feature
• display role feature-group
• role
super
Use super to switch to a user role.
Syntax
super [ rolename ]
Views
User view
Predefined user roles
network-admin
Parameters
rolename: Specifies a user role, a case-sensitive string of 1 to 63 characters. The user role must exist in
the system. If no user role is specified, this command switches the user role to network-admin.
Usage guidelines
If no switching password is configured in the local password authentication, an AUX user can switch the
user role by either entering a string or not entering anything.
Examples
# Switch to the user role network-operator.
<Sysname> super network-operator
Password:
User privilege role is network-operator, and only those commands can be used that authorized
to the role.
Related commands
• authentication super ( Security Command Reference )
• super authentication-mode
• super password
super authentication-mode
Use super authentication-mode to set an authentication mode for user role switching.
Use undo super authentication-mode to restore the default.
Syntax
super authentication-mode { local | scheme } *