R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide

141
flash:/http-r0202.bin
Active packages on chassis 2 slot 4:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on chassis 2 slot 5:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
# Confirm the software change.
<Sysname> install commit
HTTP feature rollback example
Rollback requirement
As shown in Figure 45, the IRF fabric comprises two members: the master member with the member ID
1 and the subordinate member with the member ID 2. Each member has one MPU in slot 4 (active MPU)
and one MPU in slot 5 (standby MPU).
Roll back the HTTP feature from R0202 to R0201.
Rollback procedure
# Display active software images.
<Sysname> display install active
Active packages on chassis 1 slot 4:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on chassis 1 slot 5:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on chassis 2 slot 4:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
Active packages on chassis 2 slot 5:
flash:/boot-r0201.bin
flash:/system-r0201.bin
flash:/http-r0202.bin
# Display available rollback points.
<Sysname> display install rollback
Install rollback information 1 on chassis 1 slot 4:
Updating from flash:/http-r0201.bin
to flash:/http-r0202.bin.
Install rollback information 2 on chassis 1 slot 5:
Updating from flash:/http-r0201.bin
to flash:/http-r0202.bin.