R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide

authorization are enabled, only authorized commands that are executed are recorded on the

HWTACACS server.

This section provides only the procedure for configuring command accounting. To make the command

accounting function take effect, you must configure a command accounting method in ISP domain view.

For more information, see Security Configuration Guide.

Configuration procedure

To configure command accounting:

Ste

Command

Remarks

1. Enter system view.

system-view N/A

2. Enter user interface

view.

user-interface { first-number1

[ last-number1 ] | { aux | vty }

first-number2 [ last-number2 ] }

N/A

3. Enable scheme

authentication.

authentication-mode scheme

By default, the authentication mode is none

for the AUX user interface.

4. Enable command

accounting.

command accounting

By default, command accounting is

disabled, and the accounting server does

not record the commands executed by

users.