R21xx-HP FlexFabric 11900 IP Multicast Command Reference

100
command displays information about the dynamic MLD snooping forwarding entries on all MPUs in the
IRF fabric. (In IRF mode.)
Examples
# Display information about the dynamic MLD snooping forwarding entries in VLAN 2.
<Sysname> display mld-snooping group vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Host slots (1 in total):
1
Host ports (1 in total):
XGE1/0/2
Table 29 Command output
Field Descri
p
tion
Total 1 entries Total number of dynamic MLD snooping forwarding entries.
VLAN 2: Total 1 entries Total number of dynamic MLD snooping forwarding entries in VLAN.
(::, FF1E::101) (S, G) entry, where "::" represents any IPv6 multicast source.
Host slots (1 in total)
Total number of cards where the member ports reside and the slot IDs of the
cards.
Host ports (1 in total) Total number of member ports and the port list.
Related commands
reset mld-snooping group
display mld-snooping router-port
Use display mld-snooping router-port to display information about dynamic router ports.
Syntax
In standalone mode:
display mld-snooping
router-port [ vlan vlan-id ] [ slot slot-number ]
In IRF mode:
display mld-snooping
router-port [ vlan vlan-id ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.