R21xx-HP FlexFabric 11900 IP Multicast Command Reference

101
slot slot-number: Specifies a card by the number of the slot where the card is inserted. If no card is
specified, this command displays information about the dynamic router ports on MPU. (In standalone
mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument represents the member ID of a device in the IRF fabric, and the slot-number argument
represents the number of the slot where the card is inserted. If no member device is specified, this
command displays information about the dynamic router ports on all MPUs in the IRF fabric. (In IRF
mode.)
Examples
# Display information about the dynamic router ports in VLAN 2.
<Sysname> display mld-snooping router-port vlan 2
VLAN 2:
Router slots (1 in total):
1
Router ports (2 in total):
XGE1/0/1
XGE1/0/2
Table 30 Command output
Field Descri
p
tion
VLAN 2 VLAN ID.
Router slots (1 in total)
Total number of cards where the dynamic router ports reside and the slot IDs of the
cards.
Router ports (2 in total) Total number of dynamic router ports and the port list.
Related commands
reset mld-snooping router-port
display mld-snooping static-group
Use display mld-snooping static-group to display information about static MLD snooping forwarding
entries.
Syntax
In standalone mode:
display mld-snooping
static-group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ]
[ verbose ] [ slot slot-number ]
In IRF mode:
display mld-snooping
static-group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ]
[ verbose ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin