R21xx-HP FlexFabric 11900 IP Multicast Command Reference

105
undo entry-limit
Default
The default setting is 4294967295.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
limit: Specifies the global maximum number of MLD snooping forwarding entries, in the range of 0 to
4294967295.
Examples
# Set the global maximum number of MLD snooping forwarding entries to 512.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512
fast-leave (MLD-snooping view)
Use fast-leave to enable MLD snooping fast-leave processing globally.
Use undo fast-leave to disable MLD snooping fast-leave processing globally.
Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
Default
MLD snooping fast-leave processing is disabled.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to ten VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If this option is not specified, this command takes effect for all VLANs.
Usage guidelines
When an MLD done message arrives at a port that has the MLD snooping fast-leave processing feature
enabled, the switch immediately removes that port from the forwarding entry for the multicast group
specified in the done message.
The global configuration is effective on all ports but has a lower priority than the configuration made on
a specific port.