R21xx-HP FlexFabric 11900 IP Multicast Command Reference

121
reset mld-snooping group
Use reset mld-snooping group to remove the dynamic MLD snooping forwarding entries for the specified
IPv6 multicast groups.
Syntax
reset mld-snooping group { ipv6-group-address [ ipv6-source-address ] | all } [ vlan vlan-id ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value of this argument is
in the range of FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal number in the range of 0 to F.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no multicast source is
specified, this command removes the dynamic MLD snooping forwarding entries for all IPv6 multicast
sources.
all: Specifies all IPv6 multicast groups.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Remove the dynamic MLD snooping forwarding entries for all IPv6 multicast groups.
<Sysname> reset mld-snooping group all
Related commands
display mld-snooping group
reset mld-snooping router-port
Use reset mld-snooping router-port to remove dynamic router ports.
Syntax
reset mld-snooping router-port { all | vlan vlan-id }
Views
User view
Predefined user roles
network-admin
Parameters
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Remove all dynamic router ports.
<Sysname> reset mld-snooping router-port all