R21xx-HP FlexFabric 11900 IP Multicast Command Reference

125
Boundary Interface
3 Vlan-interface1
Table 34 Command output
Field Descri
p
tion
Boundary
IPv6 multicast group or IPv6 admin-scope zone that corresponds to the IPv6
multicast boundary.
Interface Boundary interface that corresponds to the IPv6 multicast boundary.
Related commands
ipv6 multicast boundary
display ipv6 multicast forwarding-table
Use display ipv6 multicast forwarding-table to display information about the IPv6 multicast forwarding
table.
Syntax
In standalone mode:
display ipv6 multicast forwarding-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | incoming-interface interface-type interface-number | outgoing-interface { exclude |
include | match } interface-type interface-number | slot slot-number | statistics ] *
In IRF mode:
display ipv6 multicast forwarding-table [ ipv6-source-address [ prefix-length ] | ipv6-group-address
[ prefix-length ] | chassis chassis-number slot slot-number | incoming-interface interface-type
interface-number | outgoing-interface { exclude | include | match } interface-type interface-number |
statistics ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where x and
y represent any hexadecimal number from 0 through F.
prefix-length: Specifies the address prefix length. The default value is 128. For an IPv6 multicast group
address, the value range for this argument is 8 to 128. For an IPv6 multicast source address, the value
range for this argument is 0 to 128.
incoming-interface: Specifies the IPv6 forwarding entries that include the specified incoming interface.
interface-type interface-number: Specifies an interface by its type and number.
outgoing-interface: Specifies the IPv6 forwarding entries that include the specified outgoing interface.