R21xx-HP FlexFabric 11900 IP Multicast Command Reference

128
interface-type interface-number: Specifies an interface by its type and number.
outgoing-interface: Displays the IPv6 routing entries that include the specified outgoing interface.
exclude: Displays the IPv6 routing entries that do not include the specified interface in the outgoing
interface list.
include: Displays the IPv6 routing entries that include the specified interface in the outgoing interface list.
match: Displays the IPv6 routing entries that include only the specified interface in the outgoing interface
list.
Usage guidelines
IPv6 multicast routing tables are the basis of IPv6 multicast forwarding. You can display the establishment
state of an (S, G) entry by checking the IPv6 multicast routing table.
Examples
# Display information about the IPv6 multicast routing table.
<Sysname> display ipv6 multicast routing-table
Total 1 entry
00001. (2001::2, FFE3::101)
Uptime: 00:00:14
Upstream Interface: Vlan-interface1
List of 1 downstream interface
1: Vlan-interface2
Table 37 Command output
Field Descri
p
tion
Total 1 entry Total number of (S, G) entries in the IPv6 multicast routing table.
00001 Sequence number of the (S, G) entry.
(2001::2, FFE3::101) (S, G) entry in the IPv6 multicast forwarding table.
Uptime Length of time for which the (S, G) entry has been up.
Upstream Interface
Upstream interface of the (S, G) entry. IPv6 multicast packets should
arrive through this interface.
List of 1 downstream interfaces
Downstream interface list. These interfaces must forward multicast
packets.
Related commands
reset ipv6 multicast routing-table
display ipv6 multicast rpf-info
Use display ipv6 multicast rpf-info to display RPF information of an IPv6 multicast source.
Syntax
display ipv6 multicast rpf-info ipv6-source-address [ ipv6-group-address ]
Views
Any view