R21xx-HP FlexFabric 11900 IP Multicast Command Reference

149
Field Descri
p
tion
Candidate BSR address Address of the candidate BSR.
Priority BSR priority.
Uptime Length of time the BSR has been up.
display ipv6 pim claimed-route
Use display ipv6 pim claimed-route to display information about all routes that IPv6 PIM uses.
Syntax
display ipv6 pim claimed-route [ipv6-source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no IPv6 multicast source is
specified, this command displays information about all routes that IPv6 PIM uses.
Examples
# Display information about all routes that IPv6 PIM uses.
<Sysname> display ipv6 pim claimed-route
RPF-route selecting rule: longest-match
Route/mask: 7:11::/64 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8::2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7:11::10, ff1e::1)
(7:11::10, ff1e::2)
(7:11::10, ff1e::3)
(*, ff1e::4)
Route/mask: 7:12::/64 (unicast)
RPF interface: Vlan-interface2, RPF neighbor: 8::3,
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7:12::10, ff1e::1)
(7:12::10, ff1e::2)