R21xx-HP FlexFabric 11900 IP Multicast Command Reference

150
Table 42 Command output
Field Descri
p
tion
Route/mask
Route entry. Route types in parentheses include:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Directly connected unicast route.
• unicast—Other unicast route, such as static unicast route.
RPF interface Name of the RPF interface.
RPF neighbor IPv6 address of the RPF neighbor.
Total number of (S,G) or (*,G) dependent on
this route entry
Total number (S, G) or (*, G) entries dependent on the RPF
route and their details.
display ipv6 pim c-rp
Use display ipv6 pim c-rp to display C-RP information in the IPv6 PIM-SM domain.
Syntax
display ipv6 pim c-rp [ local ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
local: Specifies local C-RPs. If this keyword is not specified, this command displays information about all
C-RPs.
Usage guidelines
You can display information about learned C-RPs on only the BSR. On other devices, you can display
information about the locally configured C-RPs.
Examples
# Display information about learned C-RPs.
<Sysname> display ipv6 pim c-rp
Scope: non-scoped
Group/MaskLen: FF00::/8
C-RP address Priority HoldTime Uptime Expires
8:12::2 (local) 192 150 00:27:48 00:01:43
Group/MaskLen: FF23::/92 Expires: 00:02:07
# Display information about the locally configured C-RPs.
<Sysname> display ipv6 pim c-rp local
Candidate RP: 8:12::2(Loop1)
Priority: 192