R21xx-HP FlexFabric 11900 IP Multicast Command Reference

154
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, this command displays information about IPv6 PIM neighbors on all interfaces.
verbose: Displays detailed IPv6 PIM neighbor information. If you do not specify this keyword, this
command displays brief IPv6 PIM neighbor information.
Examples
# Display brief information about all IPv6 PIM neighbors.
<Sysname> display ipv6 pim neighbor
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires DR-Priority
FE80::A01:101:1 Vlan1 02:50:49 00:01:31 1
FE80::A01:102:1 Vlan2 02:49:39 00:01:42 1
# Display detailed information about the IPv6 PIM neighbor with the IPv6 address 11.110.0.20.
<Sysname> display ipv6 pim neighbor fe80::a01:101:1 verbose
Neighbor: FE80::A01:101:1
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Secondary address(es):
1::1
Table 46 Command output
Field Descri
p
tion
Neighbor Primary IPv6 address (link-local address) of the IPv6 PIM neighbor.
Interface Interface that connects to the IPv6 PIM neighbor.
Uptime Length of time the IPv6 PIM neighbor has been up.
Expires/Expiry time
Time remaining of the IPv6 PIM neighbor lifetime, where "never" means
that the IPv6 PIM neighbor is always up and reachable.
DR-Priority/DR Priority Priority of the IPv6 PIM neighbor.
Generation ID
Generation ID of the IPv6 PIM neighbor. (A random value that indicates a
status change of the IPv6 PIM neighbor.)
Holdtime
Lifetime of the IPv6 PIM neighbor, where "forever" means that the IPv6 PIM
neighbor is always up and reachable.
LAN delay Delay for sending prune messages.
Override interval Interval between two override messages.