R21xx-HP FlexFabric 11900 IP Multicast Command Reference

155
Field Descri
p
tion
State refresh interval
Interval for refreshing state.
This field is displayed only when the IPv6 PIM neighbor is operating in
IPv6 PIM-DM mode and the state refresh feature is enabled.
Neighbor tracking Neighbor tracking status: enabled/disabled.
Secondary address(es) Secondary IPv6 address (non-link-local address) of the IPv6 PIM neighbor.
display ipv6 pim routing-table
Use display ipv6 pim routing-table to display IPv6 PIM routing table information.
Syntax
display ipv6 pim routing-table [ ipv6-group-address [ prefix-length ] | ipv6-source-address
[ prefix-length ] | flags flag-value | fsm | incoming-interface interface-type interface-number | mode
mode-type | outgoing-interface { exclude | include | match } interface-type interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address, in the range of FFxy::/16,
where x and y represent any hexadecimal number between 0 and F, inclusive. If you do not specify an
IPv6 multicast group, this command displays IPv6 PIM routing entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address.
prefix-length: Specifies the address prefix length. The default value is 128. For an IPv6 multicast group
address, the value range for this argument is 8 to 128. For an IPv6 multicast source address, the value
range for this argument is 0 to 128.
flags flag-value: Specifies a flag. If you do not specify a flag, this command displays IPv6 PIM routing
entries that contain any flags.
The following lists the values of the flag-value argument and their meanings:
• act: Specifies IPv6 PIM routing entries that have been used for routing data.
• del: Specifies IPv6 PIM routing entries to be deleted.
• exprune: Specifies IPv6 PIM routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
• ext: Specifies IPv6 PIM routing entries containing outgoing interfaces provided by other multicast
routing protocols.
• loc: Specifies IPv6 PIM routing entries on the devices that reside on the same subnet as the IPv6
multicast source.
• niif: Specifies IPv6 PIM routing entries containing unknown incoming interfaces.
• nonbr: Specifies IPv6 PIM routing entries with IPv6 PIM neighbor lookup failure.