R21xx-HP FlexFabric 11900 IP Multicast Command Reference

156
• rpt: Specifies IPv6 PIM routing entries on the RPT branches where (S, G) prunes have been sent to
the RP.
• spt: Specifies IPv6 PIM routing entries on the SPT.
• swt: Specifies IPv6 PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies IPv6 PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.
incoming-interface interface-type interface-number: Specifies an incoming interface. If you do not
specify an incoming interface, this command displays IPv6 PIM routing entries that contain any incoming
interfaces.
interface-type interface-number: Specifies an interface by its type and number.
mode mode-type: Specifies an IPv6 PIM mode. If you do not specify an IPv6 PIM mode, this command
displays IPv6 PIM routing entries in all modes. The available IPv6 PIM modes include:
• dm: Specifies IPv6 PIM-DM.
• sm: Specifies IPv6 PIM-SM.
outgoing-interface { exclude | include | match } interface-type interface-number: Specifies an outgoing
interface. If you do not specify an outgoing interface, this command displays IPv6 PIM routing entries that
contain any outgoing interfaces. Whether a specified outgoing interface is contained in the IPv6 PIM
routing table depends on the following conditions:
• If you specify an excluded interface, this command displays IPv6 PIM routing entries that do not
contain the specified outgoing interface.
• If you specify an included interface, this command displays IPv6 PIM routing entries that contain the
specified outgoing interface.
• If you specify a matching interface, this command displays IPv6 PIM routing entries that contain
only the specified outgoing interface.
Examples
# Display IPv6 PIM routing table information.
<Sysname> display ipv6 pim routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(2001::2, FFE3::101)
RP: FE80::A01:100:1
Protocol: pim-sm, Flag: SPT LOC ACT
UpTime: 02:54:43
Upstream interface: Vlan-interface1
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 1
1: Vlan-interface2
Protocol: pim-sm, UpTime: 02:54:43, Expires: 00:02:47
# Display the state machine information of the IPv6 PIM routing table.
<Sysname> display ipv6 pim routing-table fsm
Total 0 (*, G) entry; 1 (S, G) entry