R21xx-HP FlexFabric 11900 IP Multicast Command Reference

159
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal
number from 0 to F, inclusive. If no IPv6 multicast group is specified, this command displays information
about all RPs for IPv6 multicast groups.
Examples
# Display information about the RP for the IPv6 multicast group FF0E::101.
<Sysname> display ipv6 pim rp-info ff0e::101
BSR RP address is: 7:12::1
Priority: 192
HoldTime: 180
Uptime: 03:01:10
Expires: 00:02:30
Static RP address is: 7:12::1
Preferred: No
Configured ACL: 2003
RP mapping for this group is: 7:12::1 (local host)
# Display information about all RPs for all IPv6 multicast groups.
<Sysname> display ipv6 pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: FF00::/8
RP address Priority HoldTime Uptime Expires
8:12::2 (local) 192 180 03:01:36 00:02:29
Group/MaskLen: FF23::/92
RP address Priority HoldTime Uptime Expires
7:12::1 (local) 192 180 00:00:39 00:02:57
Static RP information:
RP address ACL Mode Preferred
3:3::1 2000 pim-sm No
3:3::3 2002 pim-sm No
3:3::4 pim-sm No
3:3::5 2002 pim-sm Yes
Table 48 Command output
Field Descri
p
tion
Group/MaskLen IPv6 multicast group to which the RP is designated.
(local)
Local RP. If this field is not displayed, it means that the RP is not a locally
configured RP.
Priority Priority of the RP.
HoldTime RP lifetime.