R21xx-HP FlexFabric 11900 IP Multicast Command Reference

23
igmp-snooping static-router-port
Use igmp-snooping static-router-port to configure a port as a static router port.
Use undo igmp-snooping static-router-port to restore the default.
Syntax
igmp-snooping static-router-port vlan vlan-id
undo igmp-snooping static-router-port { all | vlan vlan-id }
Default
A port is not a static router port.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Configure Ten-GigabitEthernet 1/0/1 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] igmp-snooping static-router-port vlan 2
igmp-snooping version
Use igmp-snooping version to specify the IGMP snooping version.
Use undo igmp-snooping version to restore the default.
Syntax
igmp-snooping version version-number
undo igmp-snooping version
Default
The default setting is IGMPv2 snooping.
Views
VLAN view
Predefined user roles
network-admin
Parameters
version-number: Specifies an IGMP snooping version, 2 or 3.
Usage guidelines
You must enable IGMP snooping for a VLAN before you configure this command for the VLAN.