R21xx-HP FlexFabric 11900 IP Multicast Command Reference

25
max-response-time (IGMP-snooping view)
Use max-response-time to set the global maximum response time for IGMP general queries.
Use undo max-response-time to restore the default.
Syntax
max-response-time interval
undo max-response-time
Default
The default setting is 10 seconds.
Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
interval: Sets the maximum response time (in seconds) for IGMP general queries, in the range of 1 to 25.
Usage guidelines
The global configuration is effective on all VLANs, but has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the global maximum response time for IGMP general queries to 5 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] max-response-time 5
Related commands
igmp-snooping max-response-time
overflow-replace (IGMP-snooping view)
Use overflow-replace to enable the multicast group replacement function globally.
Use undo overflow-replace to disable the multicast group replacement function globally.
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
Default
The multicast group replacement function is disabled globally.
Views
IGMP-snooping view
Predefined user roles
network-admin