R21xx-HP FlexFabric 11900 IP Multicast Command Reference

Parameters

mac-address: Specifies a multicast MAC address. The MAC address can be any legal multicast MAC

address except 0100-5Exx-xxxx and 3333-xxxx-xxxx, where "x" represents any hexadecimal number

from 0 to F.

vlan vlan-id: Displays multicast MAC address entries for the specified VLAN, where the vlan-id argument

is in the range of 1 to 4094. If no VLAN is specified, this command displays the static multicast MAC

address entries for all VLANs.

multicast: Displays static multicast MAC address entries.

count: Displays the number of static multicast MAC address entries. If this keyword is specified, this

command displays the number of matching static multicast MAC address entries. If this keyword is not

specified, this command displays the contents of the matching entries rather than the entry count.

Usage guidelines

With no parameters specified or with only vlan, count, or both of them specified, this command displays

all MAC address table entries, including static multicast MAC address entries and unicast MAC address

entries.

Examples

# Display the static multicast MAC address entries for VLAN 2.

<Sysname> display mac-address multicast vlan 2

MAC Address VLAN ID State Port/NickName Aging

0100-0001-0001 2 Multicast XGE1/0/1 N

XGE1/0/2

# Display the number of static multicast MAC address entries.

<Sysname> display mac-address multicast count

1 mac address(es) found.

Table 9 Command output

Field Descri

tion

VLAN ID

ID of the VLAN to which the network device identified by the MAC address

belongs.

State

Status of the MAC address, where "multicast" indicates a static multicast

MAC address entry.

Port/NickName

Outgoing ports or nickname of the Egress RB in a TRILL network for the

packet that is sent to the MAC address in this MAC address entry. For more

information about the nickname, TRILL, and RB, see TRILL Configuration

Guide.

Aging State of the aging timer, where "N" indicates that this entry never expires.

1 mac address(es) found One static multicast MAC address entry is found.

Related commands

mac-address multicast

display multicast boundary

Use display multicast boundary to display multicast boundary information.