R21xx-HP FlexFabric 11900 IP Multicast Command Reference

36
Table 14 Command output
Field Descri
p
tion
Destinations Number of the multicast destination addresses.
Routes Number of routes.
Destination/Mask Destination address and mask length.
Pre Route preference.
RPF Neighbor IP address of the RPF neighbor to the reachable destination.
Interface Outgoing interface to the reachable destination.
display multicast rpf-info
Use display multicast rpf-info to display the RPF information of a multicast source.
Syntax
display multicast rpf-info source-address [ group-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-address: Specifies a multicast source address.
group-address: Specifies a multicast group address, in the range of 224.0.1.0 to 239.255.255.255.
Examples
# Display the RPF information of multicast source 192.168.1.55.
<Sysname> display multicast rpf-info 192.168.1.55
RPF information about source 192.168.1.55:
RPF interface: Vlan-interface1, RPF neighbor: 10.1.1.1
Referenced route/mask: 192.168.1.0/24
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 15 Command output
Field Descri
p
tion
RPF neighbor IP address of the RPF neighbor.
Referenced route/mask Referenced route and its mask length.