R21xx-HP FlexFabric 11900 IP Multicast Command Reference

59
Field Descri
p
tion
Uptime Length of time the BSR has been up.
display pim claimed-route
Use display pim claimed-route to display information about all routes that PIM uses.
Syntax
display pim claimed-route [ source-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this
command displays information about all routes that PIM uses.
Examples
# Display information about all routes that PIM uses.
<Sysname> display pim claimed-route
RPF-route selecting rule: longest-match
Route/mask: 7.11.0.0/16 (unicast (direct))
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.2
Total number of (S,G) or (*,G) dependent on this route entry: 4
(7.11.0.10, 225.1.1.1)
(7.11.0.10, 226.1.1.1)
(7.11.0.10, 227.1.1.1)
(*, 228.1.1.1)
Route/mask: 7.12.0.0/16 (multicast static)
RPF interface: Vlan-interface2, RPF neighbor: 8.0.0.3,
Config NextHop: 8.0.0.5
Total number of (S,G) or (*,G) dependent on this route entry: 2
(7.12.0.10, 226.1.1.1)
(7.12.0.10, 225.1.1.1)