R21xx-HP FlexFabric 11900 IP Multicast Command Reference

60
Table 19 Command output
Field Descri
p
tion
Route/mask
Route entry. Route types in parentheses include:
• igp—IGP unicast route.
• egp—EGP unicast route.
• unicast (direct)—Direct unicast route.
• unicast—Other unicast route, such as static unicast route.
• multicast static—Static multicast route.
RPF interface Name of the RPF interface.
RPF neighbor IP address of the RPF neighbor.
Config NextHop
Address of the configured next hop. This field is displayed only
when the static multicast route is configured with a next hop.
Total number of (S,G) or (*,G) dependent on
this route entry
Total number (S, G) or (*, G) entries dependent on the RPF
route and their details.
display pim c-rp
Use display pim c-rp to display C-RP information in the PIM-SM domain.
Syntax
display pim c-rp [ local ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
local: Specifies local C-RPs. If this keyword is not specified, this command displays information about all
C-RPs.
Usage guidelines
You can view information about learned C-RPs on only the BSR. On other devices, you can view
information about the locally configured C-RPs.
Examples
# Display information about learned C-RPs.
<Sysname> display pim c-rp
Scope: non-scoped
Group/MaskLen: 224.0.0.0/4
C-RP address Priority HoldTime Uptime Expires
1.1.1.1 (local) 192 150 03:01:36 00:02:29
2.2.2.2 192 150 1d:13h 00:02:02
Group/MaskLen: 226.1.1.0/24 Expires: 00:00:33