R21xx-HP FlexFabric 11900 IP Multicast Command Reference

61
Group/MaskLen: 225.1.0.0/16
C-RP Address Priority HoldTime Uptime Expires
3.3.3.3 192 150 12w:5d 00:02:05
# Display information about the locally configured C-RPs.
<Sysname> display pim c-rp local
Candidate RP: 12.12.12.9(Loop1)
Priority: 192
HoldTime: 150
Advertisement interval: 60
Next advertisement scheduled at: 00:00:48
Table 20 Command output
Field Descri
p
tion
Group/MaskLen Multicast group to which the C-RP is designated.
HoldTime C-RP lifetime.
Uptime
Length of time the C-RP has been up, where "w" means weeks, "d" means
days, and "h" means hours.
Expires Remaining time of the C-RP/multicast group lifetime.
Candidate RP IP address of the locally configured C-RP.
Advertisement interval
Interval between two advertisement messages sent by the locally
configured C-RP.
Next advertisement scheduled at
Time remaining for the locally configured C-RP to send the next
advertisement message.
display pim interface
Use display pim interface to display PIM information on an interface.
Syntax
display pim interface [ interface-type interface-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays PIM information on all interfaces.
verbose: Displays detailed PIM information. If you do not specify this keyword, this command displays
brief PIM information.
Examples
# Display brief PIM information on all interfaces.