R21xx-HP FlexFabric 11900 IP Multicast Command Reference

64
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify an interface, this command displays information about PIM neighbors on all interfaces.
verbose: Displays detailed PIM neighbor information. If you do not specify this keyword, this command
displays brief PIM neighbor information.
Examples
# Display brief information about all PIM neighbors.
<Sysname> display pim neighbor
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires DR-Priority
10.1.1.2 Vlan1 02:50:49 00:01:31 1
20.1.1.2 Vlan2 02:49:39 00:01:42 1
# Display detailed information about the PIM neighbor with the IP address 11.110.0.20.
<Sysname> display pim neighbor 11.110.0.20 verbose
Neighbor: 11.110.0.20
Interface: Vlan-interface3
Uptime: 00:00:10
Expiry time: 00:00:30
DR Priority: 1
Generation ID: 0x2ACEFE15
Holdtime: 105 s
LAN delay: 500 ms
Override interval: 2500 ms
State refresh interval: 60 s
Neighbor tracking: Disabled
Table 23 Command output
Field Descri
p
tion
Neighbor IP address of the PIM neighbor.
Interface Interface that connect to the PIM neighbor.
Uptime Length of time the PIM neighbor has been up.
Expires/Expiry time
Time remaining of the PIM neighbor lifetime, where "never" means that
the PIM neighbor is always up and reachable.
DR-Priority/DR Priority Priority of the PIM neighbor.
Generation ID
Generation ID of the PIM neighbor. (A random value that indicates a
status change of the PIM neighbor.)
Holdtime
Lifetime of the PIM neighbor, where "forever" means that the PIM neighbor
is always up and reachable.
LAN delay Delay for sending prune messages.
Override interval Interval between two override messages.
State refresh interval
Interval for refreshing state. This field is displayed only when the PIM
neighbor operates in PIM-DM mode and the state refresh capability is
enabled.