R21xx-HP FlexFabric 11900 IP Multicast Command Reference

65
Field Descri
p
tion
Neighbor tracking Neighbor tracking status: enabled/disabled.
display pim routing-table
Use display pim routing-table to display PIM routing table information.
Syntax
display pim routing-table [ group-address [ mask { mask-length | mask } ] | source-address [ mask
{ mask-length | mask } ] | flags flag-value | fsm | incoming-interface interface-type interface-number |
mode mode-type | outgoing-interface { exclude | include | match } interface-type interface-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.0.0 to
239.255.255.255. If you do not specify a multicast group, this command displays PIM routing entries for
all multicast groups.
source-address: Specifies a multicast source by its IP address.
mask-length: Specifies the address mask length in the range of 0 to 32. The default value is 32.
mask: Specifies the address mask. The default value is 255.255.255.255.
flags flag-value: Specifies a flag. If you do not specify a flag, this command displays PIM routing entries
that contain any flags. The following lists the values of the flag-value argument and their meanings:
• act: Specifies PIM routing entries that have been used for routing data.
• del: Specifies PIM routing entries to be deleted.
• exprune: Specifies PIM routing entries containing outgoing interfaces pruned by other multicast
routing protocols.
• ext: Specifies PIM routing entries containing outgoing interfaces provided by other multicast routing
protocols.
• loc: Specifies PIM routing entries on the devices that reside on the same subnet as the multicast
source.
• niif: Specifies PIM routing entries containing unknown incoming interfaces.
• nonbr: Specifies PIM routing entries with PIM neighbor lookup failure.
• rpt: Specifies PIM routing entries on the RPT branches where (S, G) prunes have been sent to the RP.
• spt: Specifies PIM routing entries on the SPT.
• swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
• wc: Specifies PIM routing entries with wildcards.
fsm: Displays detailed information about the finite state machine.