R21xx-HP FlexFabric 11900 IP Multicast Command Reference

69
Field Descri
p
tion
Uptime Length of time the RP has been up.
Expires Remaining time of the RP lifetime.
Preferred Whether the static RP is preferred.
Configured ACL/ACL ACL defining the multicast groups to which the static RP is designated.
Mode PIM mode to which the static RP is designated.
RP mapping for this group IP address of the RP that provides services for the multicast group.
hello-option dr-priority (PIM view)
Use hello-option dr-priority to set the global priority for DR election.
Use undo hello-option dr-priority to restore the default.
Syntax
hello-option dr-priority priority
undo hello-option dr-priority
Default
The global priority for DR election is 1.
Views
PIM view
Predefined user roles
network-admin
Parameters
priority: Sets the priority for DR election, in the range of 0 to 4294967295. A larger value indicates a
higher priority.
Usage guidelines
You can set the priority for DR election in PIM view or interface view. The configurations made in PIM
view are effective on all interfaces, and the configurations made in interface view are effective on only
the current interface. If you set the priority for DR election in both PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the global priority for DR election to 3.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] hello-option dr-priority 3
Related commands
pim hello-option dr-priority