R21xx-HP FlexFabric 11900 IP Multicast Command Reference

73
holdtime join-prune (PIM view)
Use holdtime join-prune to set the global joined/pruned state holdtime timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune time
undo holdtime join-prune
Default
The global joined/pruned state holdtime timer is 210 seconds.
Views
PIM view
Predefined user roles
network-admin
Parameters
time: Sets the joined/pruned state holdtime timer (in seconds), in the range of 1 to 65535.
Usage guidelines
You can set the joined/pruned state holdtime timer in PIM view or interface view. The configurations
made in PIM view are effective to all interfaces and the configurations made in interface view are
effective to only the current interface. If you set the joined/pruned state holdtime timer in both PIM view
and interface view, the configuration in interface view always takes precedence.
Examples
# Set the global joined/pruned state holdtime timer to 280 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] holdtime join-prune 280
Related commands
pim holdtime join-prune
jp-pkt-size (PIM view)
Use jp-pkt-size to set the maximum size of each join/prune message.
Use undo jp-pkt-size to restore the default.
Syntax
jp-pkt-size size
undo jp-pkt-size
Default
The maximum size of a join/prune message is 8100 bytes.
Views
PIM view