R21xx-HP FlexFabric 11900 IP Multicast Command Reference

77
Parameters
priority: Sets the priority for DR election, in the range of 0 to 4294967295. A larger value indicates a
higher priority.
Usage guidelines
You can set the priority for DR election in PIM view or interface view. The configurations made in PIM
view are effective on all interfaces, and the configurations made in interface view are effective on only
the current interface. If you set the priority for DR election in both PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the priority for DR election to 3 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option dr-priority 3
Related commands
hello-option dr-priority (PIM view)
pim hello-option holdtime
Use pim hello-option holdtime to set the PIM neighbor lifetime on an interface.
Use undo pim hello-option holdtime to restore the default.
Syntax
pim hello-option holdtime time
undo pim hello-option holdtime
Default
The PIM neighbor lifetime is 105 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
time: Sets the PIM neighbor lifetime (in seconds), in the range of 1 to 65535. A value of 65535 means
that the PIM neighbor is always reachable.
Usage guidelines
You can set the PIM neighbor lifetime in PIM view or interface view. The configurations made in PIM view
are effective on all interfaces, and the configurations made in interface view are effective on only the
current interface. If you set the PIM neighbor lifetime in both PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Sets the PIM neighbor lifetime to 120 seconds on VLAN-interface 100.
<Sysname> system-view