R21xx-HP FlexFabric 11900 IP Multicast Command Reference

80
undo pim hello-option override-interval
Default
The override interval is 2500 milliseconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the override interval (in milliseconds), in the range of 1 to 65535.
Usage guidelines
You can set the override interval in PIM view or interface view. The configurations made in PIM view are
effective on all interfaces, and the configurations made in interface view are effective on only the current
interface. If you set the override interval in both PIM view and interface view, the configuration in
interface view always takes precedence.
Examples
# Set the override interval to 2000 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim hello-option override-interval 2000
Related commands
• hello-option lan-delay (PIM view)
• hello-option override-interval (PIM view)
• pim hello-option lan-delay
pim holdtime join-prune
Use pim holdtime join-prune to set the joined/pruned state holdtime timer on an interface.
Use undo pim holdtime join-prune to restore the default.
Syntax
pim holdtime join-prune time
undo pim holdtime join-prune
Default
The joined/pruned state holdtime timer is 210 seconds.
Views
Interface view
Predefined user roles
network-admin