R21xx-HP FlexFabric 11900 IP Multicast Command Reference

2
Host-aging-time: 260s
Router-aging-time: 260s
Max-response-time: 10s
Last-member-query-interval: 1s
Table 1 Command output
Field Descri
p
tion
IGMP snooping
IGMP snooping status:
• Enabled.
• Disabled.
Drop-unknown
Status of dropping unknown multicast data:
• Enabled.
• Disabled.
Version IGMP snooping version.
Host-aging-time Aging timer for the dynamic member port.
Router-aging-time Aging timer for the dynamic router port.
Max-response-time Maximum response time for IGMP general queries.
Last-member-query-interval Interval for sending IGMP group-specific queries.
display igmp-snooping group
Use display igmp-snooping group to display information about dynamic IGMP snooping forwarding
entries.
Syntax
In standalone mode:
display igmp-snooping
group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot
slot-number ]
In IRF mode:
display igmp-snooping
group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ chassis
chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-address: Specifies a multicast group by its IP address, in the range of 224.0.1.0 to
239.255.255.255. If no multicast group is specified, this command displays information about the
dynamic IGMP snooping forwarding entries for all multicast groups.