R21xx-HP FlexFabric 11900 IP Multicast Command Reference

84
undo pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Specifies a graft retry timer (in seconds), in the range of 1 to 65535.
Examples
# Set the graft retry timer to 80 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim timer graft-retry 80
pim timer hello
Use pim timer hello to set the interval for sending hello messages on an interface.
Use undo pim timer hello to restore the default.
Syntax
pim timer hello interval
undo pim timer hello
Default
The interval for sending hello messages is 30 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
interval: Sets the interval (in seconds) for sending hello messages, in the range of 0 to 18000. A value
of 0 means that no hello messages are sent.
Usage guidelines
You can set the interval for sending hello messages in PIM view or interface view. The configurations
made in PIM view are effective on all interfaces, and the configurations made in interface view are
effective on only the current interface. If you set the interval in both PIM view and interface view, the
configuration in interface view always takes precedence.
Examples
# Set the interval for sending hello messages to 40 seconds on VLAN-interface 100.
<Sysname> system-view