R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide

93
(10.110.5.100, 225.1.1.1)
Protocol: pim-dm, Flag: LOC ACT
UpTime: 00:03:27
Upstream interface: Vlan-interface300
Upstream neighbor: NULL
RPF prime neighbor: NULL
Downstream interface(s) information:
Total number of downstreams: 2
1: Vlan-interface103
Protocol: pim-dm, UpTime: 00:03:27, Expires: never
2: Vlan-interface102
Protocol: pim-dm, UpTime: 00:03:27, Expires: never
PIM-SM non-scoped zone configuration example
Network requirements
As shown in Figure 33, VOD streams are sent to receiver hosts in multicast. The receivers of different
subnets form stub networks, and at least one receiver host exist in each stub network. The entire PIM-SM
domain contains only one BSR.
Host A and Host C are multicast receivers in two stub networks N1 and N2.
Both VLAN-interface 105 on Switch D and VLAN-interface 102 on Switch E act as C-BSRs and C-RPs. The
C-BSR on Switch E has a higher priority. The C-RPs provide services for the multicast group range
225.1.1.0/24. Modify the hash mask length to map the multicast group range to the two C-RPs.
IGMPv2 runs between Switch A and N1, and between Switch B, Switch C, and N2.