R21xx-HP FlexFabric 11900 IP Multicast Configuration Guide

96
Bootstrap timer: 00:01:44
Elected BSR address: 192.168.9.2
Priority: 20
Hash mask length: 32
Uptime: 00:40:40
# Display BSR information on Switch D.
[SwitchD] display pim bsr-info
Scope: non-scoped
State: Candidate
Bootstrap timer: 00:01:44
Elected BSR address: 192.168.9.2
Priority: 20
Hash mask length: 32
Uptime: 00:05:26
Candidate BSR address: 192.168.4.2
Priority: 10
Hash mask length: 32
# Display BSR information on Switch E.
[SwitchE] display pim bsr-info
Scope: non-scoped
State: Elected
Bootstrap timer: 00:01:44
Elected BSR address: 192.168.9.2
Priority: 20
Hash mask length: 32
Uptime: 00:01:18
Candidate BSR address: 192.168.9.2
Priority: 20
Hash mask length: 32
# Display RP information on Switch A.
[SwitchA] display pim rp-info
BSR RP information:
Scope: non-scoped
Group/MaskLen: 225.1.1.0/24
RP address Priority HoldTime Uptime Expires
192.168.4.2 192 150 00:51:45 00:02:22
192.168.9.2 192 150 00:51:45 00:02:22
PIM-SM admin-scoped zone configuration example
Network requirements
As shown in Figure 34, VOD streams are sent to receiver hosts in multicast. The entire PIM-SM domain is
divided into admin-scoped zone 1, admin-scoped zone 2, and the global-scoped zone. Switch B, Switch
C, and Switch D are ZBRs of the three zones, respectively.